**How to Remove Bath & Body Works Lotion from Glass Bottle**

Ever found yourself in a sticky situation, quite literally, with lotion stuck in a glass bottle from Bath & Body Works? You're not alone. The frustration is real, but don't throw in the towel just yet. Here's a comprehensive guide on how to get that lotion out, ensuring you don't waste a single pump's worth.

Understanding the Challenge

Bath & Body Works lotions are known for their rich, creamy textures, which is why they're so beloved. However, this also means they can be quite thick and resistant to flow, especially when they've been sitting in a glass bottle for a while. The glass material can also make it difficult to squeeze out the last bits. But fear not, we've got you covered with some tried-and-true methods.

Before You Start

Before you dive into the rescue mission, ensure the bottle is empty of any remaining liquid lotion. If there's still some left, pour it out to avoid any mess. Also, make sure the bottle is clean and dry to prevent any bacterial growth during the process.

Materials You'll Need

• Empty Bath & Body Works lotion bottle
• Hot water
• Dish soap or hand sanitizer
• Rubber band
• Plastic bag (optional)

Method 1: Hot Water and Dish Soap

This method is simple and effective. The hot water helps to liquefy the lotion, while the dish soap breaks down the greasy residue.

1. Fill the sink or a large bowl with hot water.
2. Add a few drops of dish soap to the water.
3. Submerge the bottle in the soapy water, ensuring it's completely covered.
4. Let it soak for about 15-20 minutes. This gives the lotion time to soften and the soap to break down the residue.
5. After soaking, gently squeeze the bottle to see if the lotion comes out more easily. If not, repeat the soaking process.

Method 2: Hand Sanitizer and Heat

Hand sanitizer contains alcohol, which can help to dissolve the lotion. Combining this with heat can make the process even more effective.

1. Pour a generous amount of hand sanitizer into the bottle.
2. Fill the bottle with hot water, leaving some space for the lotion to expand.
3. Secure a rubber band around the bottle's opening to prevent the water from spilling out.
4. Place the bottle in a plastic bag (optional, but it helps to contain any mess).
5. Submerge the bottle in hot water for about 10-15 minutes. The heat helps to soften the lotion and the hand sanitizer helps to dissolve it.
6. After soaking, gently squeeze the bottle to see if the lotion comes out more easily. If not, repeat the process.

Method 3: The Freeze and Thaw Method

This method works on the principle of expansion and contraction. Freezing the lotion causes it to expand, pushing it out of the bottle. Then, thawing it makes it easier to squeeze out.

1. Fill the bottle with hot water to help soften the lotion.
2. Secure a rubber band around the bottle's opening to prevent the water from spilling out.
3. Freeze the bottle overnight. The lotion will expand and push out of the bottle.
4. The next day, run the bottle under warm water to help thaw the lotion and make it easier to squeeze out.

When All Else Fails

If none of the above methods work, it might be time to cut your losses. Use a pair of scissors to carefully cut off the top of the bottle, exposing the lotion inside. This way, you can scoop out the remaining lotion and save it for future use.

Remember, patience is key when trying to get every last bit of lotion out of a glass bottle. Don't be afraid to repeat the processes if needed. And most importantly, enjoy the process - after all, you're getting to indulge in that beloved Bath & Body Works scent once again!