"Xiaomi Hand Soap Dispenser Manual: Easy & Hygienic Guide"

Welcome to the comprehensive user manual for your Xiaomi Hand Soap Dispenser. This device is designed to provide a convenient and hygienic way to dispense soap, making it an excellent addition to your home or office. In this manual, we will guide you through the setup, usage, and maintenance of your Xiaomi Hand Soap Dispenser, ensuring you get the most out of this innovative product.

Unboxing and Initial Setup

Upon receiving your Xiaomi Hand Soap Dispenser, you will find the following items in the box:

• Xiaomi Hand Soap Dispenser
• Power adapter (USB)
• User manual

To set up your dispenser, follow these steps:

1. Remove the protective film from the dispenser.
2. Plug in the power adapter to the dispenser and a power source.
3. Allow the dispenser to charge for approximately 2 hours before first use.

Adding Soap and Adjusting Dispense Amount

The Xiaomi Hand Soap Dispenser uses liquid soap. To add soap, follow these steps:

1. Remove the soap bottle from the dispenser by pressing the release button on the side.
2. Fill the soap bottle with your preferred liquid soap.
3. Replace the soap bottle into the dispenser, ensuring it clicks into place.

To adjust the dispense amount, simply turn the dial on the front of the dispenser clockwise or counterclockwise.

Using the Xiaomi Hand Soap Dispenser

The dispenser is designed to dispense soap automatically when it detects your hand. To use, simply place your hand under the dispenser, and it will release the appropriate amount of soap. The dispenser will not dispense soap if it does not detect a hand, helping to prevent waste.

Charging and Battery Life

The Xiaomi Hand Soap Dispenser is rechargeable and comes with a USB power adapter. To charge, plug in the adapter to the dispenser and a power source. A full charge takes approximately 2 hours and provides up to 250 dispenses on a single charge.

To check the battery level, press the power button on the side of the dispenser. The LED indicator will display the remaining battery life:

• Green: More than 50% battery
• Yellow: Between 10% and 50% battery
• Red: Less than 10% battery

Maintenance and Troubleshooting

To ensure your Xiaomi Hand Soap Dispenser continues to work optimally, perform the following maintenance tasks:

• Clean the dispenser regularly to remove any soap residue or dirt.
• Replace the soap bottle when it is empty.
• Charge the dispenser when the battery level is low.

If you encounter any issues with your dispenser, consult the troubleshooting table below:

Issue	Possible Cause	Solution
Dispenser not dispensing soap	Low battery or empty soap bottle	Charge the dispenser or replace the soap bottle
Dispenser dispensing too much or too little soap	Incorrect dispense amount setting	Adjust the dispense amount dial

If you are still experiencing issues after attempting the troubleshooting steps, please contact Xiaomi customer support for further assistance.

Congratulations on your new Xiaomi Hand Soap Dispenser! With this comprehensive user manual, you are now equipped to enjoy the convenience and hygiene of this innovative product. Happy dispensing!